On this page down the page you might get some first-rate content regarding How to Troubleshoot and Repair an Electric Water Heater.
Numerous contemporary homes make use of an electric hot water heater for their heating system, due to its ease and also convenience of use. Nevertheless, much like any other electrical devices, troubles may develop with its usage, unexpectedly. It can be actually irritating to get up to a chilly shower rather than a hot one or having your bathroom with water that isn't warm enough or perhaps as well hot. Whatever the case may be, hot water heater troubles can be fairly aggravating. Fortunately, we've made a checklist of feasible options to your water heater issues. There are a variety of factors that could cause a number of these problems, it could be an issue with the power supply, the electrical burner, or the thermostat. Prior to doing anything, ensure you shut off the main power supply for security. Whatever the problem is, getting it dealt with must not pose way too much of an issue if you adhere to these steps:
Examine Your Power Supply:
As fundamental as this may appear, it is very essential. Without sufficient power, your hot water heater will not operate. So the first thing to do when your water all of a sudden retires is to confirm that it isn't a power problem. Inspect if the fuse is burnt out or the circuit breaker stumbled. If the circuit breaker is the problem, merely turn it on and off again. Change any kind of busted or damaged fuse. Evaluate the device with power after these modifications to see if it's currently working.
Examine the Burner in the Hot Water Heater:
If it's not a power problem, then attempt checking out your burner if it is still working. Examine each of your burner to make sure the problem isn't with any of them. If any of them is malfunctioning, replace that part and after that inspect whether the hot water is back on.
Check Your Thermostat:
If your hot water heater still isn't working or the water coming out isn't warm sufficient, you may require to check the temperature level settings on your top thermostat. Ensure the breaker is turned off before doing anything. Open the accessibility panel and also press the red button for temperature level reset over the thermostat. This should assist warm the water. Turn the circuit breaker back on as well as check if the issue has actually been solved.
Call A Specialist:
If after changing all faulty parts and resetting your temperature level, the hot water heater still isn't working, you might need to speak to an expert plumber for a specialist point of view. The trouble with your heating unit could be that the cold and hot taps have been changed or it might be undersized for the amount of warm water required in your house. Whatever the instance may be, a specialist plumber would certainly assist fix the trouble.
Final thought
Water heater problems are not constantly major. A number of them result from minor issues like a blown fuse or worn-out burner. Changing the damaged components must do the trick. Nevertheless, if you are still not able to solve the issue, give a call to your nearest plumber to come to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I hope you enjoyed reading our post about How to Troubleshoot and Repair an Electric Water Heater. Thank you so much for taking time to read our piece. In case you liked our article plz do not forget to share it. Thanks so much for going through it.
Quality first, dial!